How to Fix Green Algae Blooms in Your Pool

Publication date : Tuesday, November 27th, 2018

Picture this: it’s time to wind your pool down for the year, and that means running basic maintenance tasks. You walk into the backyard to get started, peel back the cover, and discover that the water beneath is thick, slimy and green. What gives?

That thick green cover you’re seeing isn’t an alien; it’s algae, an opportunistic eukaryotic organism that loves water and sunlight. It grows anywhere moisture levels and temperature levels are right – puddles, ponds, rivers, and yes, your pool, too. If you aren’t running regular maintenance, you could find yourself at war with it.

About Algae

Algae blooms can happen virtually any time. Sometimes, it’s a result of a lack of maintenance; at other times, it seems to happen for no identifiable reason. It is, however, more common during periods when pools remain filled, yet unused, untreated, and improperly maintained (such as over the winter or fall months).

Treating algae in pools is a multi-step process. Whether you’re about to close your pool for the year or opening it up for the first time in the spring, prompt treatment is a must. Left to sit, green algae can cause damage to the liner and pool filters, not to mention spurring on the development of dangerous molds. Use this step-by-step guide as a rough outline to fixing the problem.

Step 1: Clean Large Debris

Using a manual pool vacuum, scoop, or net, pull up as much debris and algae as you can. Alternatively, just drain the whole thing out and rinse it down with a hose. When the water is full and free from big chunks or dirt, brush the walls down well using a stiff broom or pool wall cleaning device. Once it appears relatively clean, refill it or move to the next step.

Step 2: Test and Balance

Test and balance the water for PH level and all other standards outlined in your pool owner’s manual. Correct these values first, before you move on to any of the other steps. This process is different for every pool, so it’s best to check your manual.

Step 3: Shock with Chlorine

For this step, you’ll need to get your hands on some calcium hypochlorite or another chlorinating product. Again, here, the directions depend on the product for your specific pool and pool size. Follow the instructions on the package closely, but double the recommended dose by two to treat green algae. If the algae is extremely dark, brown, or yellow, triple the dose instead.

Step 4: Look for the Blue and Filter it Through

Watch closely for blue pool water – this is a sign the treatment is working. Start those filters and continue to filter the algae out until the water is essentially clear. Depending on how long it’s been since the last maintenance call, you may need to change out the filters or de-clog them during this process.

Step 5: Test Again (and Maintain)

Once the water has been clear with no sign of algae for a minimum of eight hours, test the water again. Rebalance if needed and begin maintaining with chemicals and regular maintenance tasks. The more often you run upkeep, the less likely algae is to happen.

This is a simple overview of the algae treatment process, but it may not be the right choice for every instance or every pool. For more information, call Paradise Pools.

 

 

 

© Paradise Pools & Spas
Paradise Pools & Spas Contact Details:
Main address: 227 S. Pearson Road 39208 Pearl, MS ,
Tel:(601) 932-7665,
Email: info@paradisepoolsms.com
SUMMER HOURS:
March 16th - August 30th
Monday - Friday: 8:30am - 5pm
Saturday: 9am - 1pm
Sunday: Closed
WINTER HOURS:
September 1st - March 15th
Monday - Friday: 8:30am - 5pm
Saturday: 9am - 12pm
Sunday: Closed